#
# $Source: /ADFS::4/\044/Shared/unix/cvs/MiniDisc/Release/Currentbuild/!MiniDisc/!MDSetup/Messages,v $
#
# $Revision: 1.5 $
# $Date: 2004/04/17 14:52:57 $
#
# UK Messages file for !MDSetup
#
# IMPORTANT NOTE: Avoid lines with just a '#' char, as they can confuse DeskLib!
#
# ------------------------------------------------------------------------------
# -- General application information. -----------------------------------------
# ------------------------------------------------------------------------------
app.icon:iconbar00
app.icon2:iconbar10
app.purpose:Desktop Management Software
app.licence:Freeware
app.status:%s, linked on %s at %s
app.website:http://minidisc.iconbar.com/

# ------------------------------------------------------------------------------
# -- Error messages. ----------------------------------------------------------
# ------------------------------------------------------------------------------
# - Miscellaneous
err.unknown:Unknown
# - Configuration errors
err.noconf:No configuration file found.  Initialising defaults...
err.noscfile:No shortcuts configuration file found.  Initialising defaults...
err.noignore:No exceptions file found.  Initialising defaults...
err.cscfail:Failed to create a default shortcuts file.
# - URL errors
err.nonuri:Not a URI file
# - Shortcuts errors
err.srename:Cannot rename '%s' menu
err.sdelete:Cannot delete '%s' menu
err.sexists:A shortcuts menu with that name already exists
# (note: This next message lookup is 1 char too long for DeskLib!)
err.snotfound:Could not find that shortcuts menu
err.sselect:Please select a menu entry
err.nopath:Unable to locate %s


# ------------------------------------------------------------------------------
# -- Warning messages. ---------------------------------------------------------
# ------------------------------------------------------------------------------
# - Warnings dialogs button texts.
warn.bok01:Delete
warn.bno01:Cancel
warn.bsd01:Shutdown

# ------------------------------------------------------------------------------
# -- 'Special' WIMP key values. ------------------------------------------------
# ------------------------------------------------------------------------------
key.0000:Unset
key.001b:Escape
key.0180:Print
key.0181:F1
key.0182:F2
key.0183:F3
key.0184:F4
key.0185:F5
key.0186:F6
key.0187:F7
key.0188:F8
key.0189:F9
key.018a:Tab
key.018b:Copy
key.018c:Left
key.018d:Right
key.018e:Down
key.018f:Up
key.01ca:F10
key.01cb:F11
key.01cc:F12
key.01cd:Insert


# ------------------------------------------------------------------------------
# -- Configuration dialogs menu decodes. --------------------------------------
# ------------------------------------------------------------------------------

# -------------------------------------------------------------
# - Main window pane selector menu descriptions
conf.panet:Select
conf.pane:<conf.pane00>,<conf.pane01>,<conf.pane02>,<conf.pane03>,<conf.pane04>,<conf.pane05>,<conf.pane06>,<conf.pane07>,<conf.pane08>,<conf.pane09>,<conf.pane10>,<conf.pane11>,<conf.pane12>,<conf.pane13>

conf.pane00:Iconbar
conf.pane01:Miscellaneous
conf.pane02:Discs
conf.pane03:Image fsn's
conf.pane04:CD ROM
conf.pane05:Psion
conf.pane06:~Printers
conf.pane07:Shortcuts
conf.pane08:Networking
conf.pane09:Patches
conf.pane10:Toolbar
conf.pane11:~Memoriser
conf.pane12:~Trash can
conf.pane13:SmartSave


# -------------------------------------------------------------
# - Iconbar click actions menu descriptions
conf.actnt:Action
conf.actn:<conf.actn00>,<conf.actn01>,<conf.actn02>,<conf.actn03>,<conf.actn04>,<conf.actn05>,<conf.actn06>|<conf.actn99>

conf.actn00:Execute command
conf.actn01:Open file / dir / !App
conf.actn02:Launch a URL
conf.actn03:Directory menu
conf.actn04:Cycle icon type
conf.actn05:Shortcuts menu
conf.actn06:Pinboard contents menu
conf.actn99:None


# -------------------------------------------------------------
# - Shortcuts menu position in main menu
conf.shctt:Position
conf.shct:<conf.shct00>,<conf.shct01>

conf.shct00:Top of menu
conf.shct01:Bottom of menu


# -------------------------------------------------------------
# - Iconbar appearance
conf.icont:Appearance
conf.icon:<conf.icon00>,<conf.icon01>,<conf.icon02>,<conf.icon03>,<conf.icon04>

conf.icon00:Icon only
conf.icon01:Icon + time
conf.icon02:Icon + date
conf.icon03:Icon + free memory
conf.icon04:Icon + user text


# -------------------------------------------------------------
# - Application booting
conf.boott:Boot apps
conf.boot:<conf.boot00>,<conf.boot01>,<conf.boot02>

conf.boot00:Always
conf.boot01:Never
conf.boot02:With 'Alt'


# -------------------------------------------------------------
# - SmartSaver filetype selection menu
conf.ssavet:File type
conf.ssavel:<conf.ssaved>|Other
conf.ssaved:FFF Text,FFD Data,FFB BASIC,FFA Module,FEB Obey,FAF HTML


# -------------------------------------------------------------
# - Psion driver type
conf.psidt:Psion driver
conf.psid:<conf.psid00>,<conf.psid01>

conf.psid00:PsiRiscFS
conf.psid01:PsiFS


# -------------------------------------------------------------
# - Psion driver info window
conf.psidrag:Use the filer to locate %s.


# -------------------------------------------------------------
# - CDFS player option.
conf.cdfsapp:Drag your player app here.


# -------------------------------------------------------------
# - Actions performed when files are dragged to the iconbar
conf.idrgt:Drag action
conf.idrg:<conf.idrg00>,<conf.idrg01>,<conf.idrg02>,<conf.idrg03>,<conf.idrg04>,<conf.idrg05>,<conf.idrg06>|<conf.idrg99>

conf.idrg00:Copy / Save
conf.idrg01:'SmartSave'
conf.idrg02:Delete
conf.idrg03:Trash
conf.idrg04:Set CSD
conf.idrg05:<conf.actn00>
conf.idrg06:Create Shortcut in
conf.idrg99:None


# -------------------------------------------------------------
# - Files dragged to iconbar action = 'Delete' options.
conf.iddelt:Delete options
conf.iddel:<conf.iddel0>,<conf.iddel1>,<conf.iddel2>,<conf.iddel3>

conf.iddel0:Confirm
conf.iddel1:Force
conf.iddel2:Recurse
conf.iddel3:Verbose


# -------------------------------------------------------------
# - Files dragged to iconbar action = 'Add Shortcut'
conf.idsct:Add Shortcut to


# ------------------------------------------------------------------------------
# -- Shortcuts descriptions. ---------------------------------------------------
# ------------------------------------------------------------------------------

# -------------------------------------------------------------
# - Key shortcuts menu names
shct.mainmenu:Shortcuts
shct.bookmark:Bookmarks


# -------------------------------------------------------------
# - Empty shortcuts menu description
shct.empty:~EmptyMenu


# -----------------------------------------------------------------------------


# -------------------------------------------------------------
# - Miscelaneous submenu items...
menu.connect:Connect...
menu.shortcut:<shct.mainmenu>
menu.namedisc:TenLong000
menu.namedn:Disc Name
menu.empty:~Nothing
menu.nodriver:~Unknown Driver
menu.remove:Remove %s icons
# The next line has a '~' to (temporarily) disable the restore option.
# - I need to work on this code a little more...
menu.restore:~Restore %s icons


# ------------------------------------------------------------------------------
# -- Help texts. --------------------------------------------------------------
# ------------------------------------------------------------------------------

# - No other help text found.
help.nohelp:We're sorry, but there is no help available for this item!

# - MiniDisc iconbar icon help
help.iconbar:<x.04> <a.name> icon.|MClick Menu for a list of available devices.

# - 'Info' dialog help message
help.info:<x.07> displays information about <a.name>
help.info00:Click here to visit the <a.name> website
help.info01:This is my purpose in life
help.info02:This is me, I did this!
help.info08:<a.name> is free, see the manual for details.
help.info03:<x.03> information for this version of <a.name>|MClick in the field for further details.


# ------------------------------------------------------------------------------
# - Main configuration window messages
# ------------------------------------------------------------------------------
help.conf:<x.04> <a.name> <x.05>.

help.conf01:Click 'Select' to use the configuration as shown.|MClick with 'Adjust' to keep this window open.
help.conf02:<x.02> abandon any changes you have made to <a.name>s' configuration and close this window.
help.conf03:<x.02> re-load the last saved <a.name> configuration from disc
help.conf04:<x.02> save changes to <a.name> configuration to disc
help.conf05:<x.24> iconbar <x.05>
help.conf06:<x.24> FileCore specific <x.05>
help.conf07:<x.24> Image filing systems <x.05>
help.conf08:<x.24> CDFS <x.05>
help.conf09:<x.24> Psion <x.05>
help.conf10:<x.24> Printers <x.05>
help.conf11:<x.24> shortcuts <x.05>
help.conf12:<x.24> network drives <x.05>
help.conf13:<x.24> miscelaneous <x.05>
help.conf19:<x.02> view the <a.name> manual
help.conf20:<x.02> view the <a.name> web-page
help.conf21:<x.02> Launch the interactive help application (This message feels kinda-redundant!)
help.conf22:<x.24> directory containing <a.name>'s configuration files
help.conf23:<x.02> select an aspect of <a.name> to configure
help.conf24:<x.03> the current <a.name> feature being configured


# ------------------------------------------------------------------------------
# - 'Iconbar' configuration pane help messages
# ------------------------------------------------------------------------------
help.icon:<x.10> the <a.name> <x.16> actions and appearance

#help.icon04:(Various Select actions)
#help.icon05:(Various Adjust actions)
#help.icon19:(Various Drag actions)
help.icon08:<x.02> select how <a.name>  will appear on the iconbar
help.icon09:<x.03> the current setting for how <a.name> will appear on the iconbar
help.icon10:Enter your user-defined iconbar text settings in here
help.icon11:<x.02> <x.14> 'Select' <x.25> <a.name> <x.16>
help.icon12:<x.03> <x.15> 'Select' <x.25> <a.name> <x.16>
help.icon13:<x.02> <x.14> 'Adjust' <x.25> <a.name> <x.16>
help.icon14:<x.03> <x.15> 'Adjust' <x.25> <a.name> <x.16>
help.icon15:<x.02> <x.18> 'Select' on the <a.name> <x.16>
help.icon16:<x.02> <x.18> 'Adjust' on the <a.name> <x.16>
help.icon18:<x.02> configure <x.15> <x.26> <a.name> <x.16>
help.icon20:<x.02> <x.14> <x.26> <a.name> <x.16>
help.icon21:<x.03> <x.15> <x.26> <a.name> <x.16>
help.icon25:<x.02> <x.31>
help.icon26:<x.02> <x.31>
help.icon27:<x.02> <x.31>
help.icon28:<x.32> with no keybaord modifiers
help.icon29:<x.32> when shift is pressed
help.icon30:<x.32> when ctrl is pressed
help.icon31:<x.32> when shift & ctrl are pressed
help.icon32:<x.32> when alt is pressed
help.icon33:<x.32> when shift & alt are pressed
help.icon34:<x.32> when ctrl & alt are pressed
help.icon35:<x.32> when shift, ctrl & alt are pressed


# ------------------------------------------------------------------------------
# - 'Misc' configuration pane help messages
# ------------------------------------------------------------------------------
help.misc:<x.10> miscelaneous <a.name> options

help.misc04:<x.12> <a.name> starts here
help.misc05:<x.12> <a.name> exits here
help.misc06:<x.27> <a.name> starts
help.misc07:<x.27> <a.name> exits
help.misc10:<x.01> hide 'Info', 'Help', 'Choices' and 'Quit' from the main <a.name> menu <x.13>
help.misc11:<x.01> hide filing-system control sub-menus <x.13>
help.misc14:<x.02> select how <a.name> deals with applications when no sprites are available
help.misc15:<x.03> the current setting for how <a.name> will deal with applications when no sprites are available
help.misc17:<x.01> merely 'IconSprites', rather than 'Filer_Boot' applications
help.misc18:<x.01> hide the initialisation progress window when <a.name> starts
help.misc20:<x.01> show application names without the '!' in directory menus
help.misc21:<x.01> set directory menus to enable viewing the contents of application directories.  (This can be overridden for Shortcuts menu entries)
help.misc22:<x.01> make MiniDisc scan each of your devices in the background on startup.  This can sometimes cause problems with certain removable devices, but will also speed up the creation of directory menus.
help.misc23:<x.01> make MiniDisc warn you if you still have data in a RAM disc when you shutdown your computer.
help.misc24:<x.01> use the customised drive icons (as used in the Toolbar) in the main <a.name> menu as well.


# ------------------------------------------------------------------------------
# - 'Filecore' configuration pane help messages
# ------------------------------------------------------------------------------
help.file:<x.06> FileCore specific <a.name> options

help.file02:<x.01> remove FileCore devices from the iconbar
help.file03:<x.01> shade devices that appear empty in the main <a.name> menu
help.file06:<x.01> hide empty IDEFS drives from the main <a.name> menu
help.file08:<x.01> include fileCore devices in the main <a.name> menu
help.file09:<x.01> include fileCore devices in the <a.name> toolbar
help.file10:This option controls where MiniDisc will try to save files dragged to toolbar drive icons.  See the manual for full details.
help.file11:<help.file10>


# ------------------------------------------------------------------------------
# - 'Image FS' configuration pane help messages
# ------------------------------------------------------------------------------
help.imag:<x.06> image filing system <a.name> options

help.imag02:<x.01> include ResourceFS in the main <a.name> menu
help.imag03:<x.01> remove the 'Apps' folder from the iconbar
help.imag04:<x.01> open the 'Apps' directory rather than Resources:$ when clicking upon the 'Resources' entry in the main <a.name> menu
help.imag07:<x.01> include MemFS in the main <a.name> menu
help.imag08:<x.01> remove the MemFS icon from the iconbar
help.imag11:<x.01> include ResourceFS in the <a.name> toolbar
help.imag12:<x.01> include MemFS in the <a.name> toolbar


# ------------------------------------------------------------------------------
# - 'CDFS' configuration pane help messages
# ------------------------------------------------------------------------------
help.cdfs:<x.06> CDFS specific <a.name> options

help.cdfs02:<x.01> show CD ROM drives in the main <a.name> menu
help.cdfs03:<x.01> remove CD ROM drive icons from the iconbar
help.cdfs04:<x.01> dynamicaly update CDFS menus with audio controls depending upon disc type
help.cdfs06:<x.01> enable support for external CD player applications.  (Drag the player to the display field below)
help.cdfs07:<x.03> the path to the audio CD player application that <a.name> will use.  Drag a new application to this field to alter the application used.
help.cdfs08:<x.01> include CD ROM drives in the <a.name> toolbar
help.cdfs10:<x.01> support WSS's CDROMFS


# ------------------------------------------------------------------------------
# - 'Psion' configuration pane help messages
# ------------------------------------------------------------------------------
help.psio:<x.06> Psion specific <a.name> options

help.psio02:<x.01> include Psion drives in the main <a.name> menu
help.psio03:<x.02> select a Psion driver
help.psio04:<x.03> the driver software selected to connect to your organiser
help.psio07:<x.03> the location of your Psion drivers
help.psio09:<x.01> include Psion drives in the <a.name> menu


# ------------------------------------------------------------------------------
# - 'PsiRiscFS' configuration pane help messages
# ------------------------------------------------------------------------------
help.psir:<x.10> PsiRiscFS specific <a.name> options

help.psir02:<x.01> attempt to automatically connect to your Psion when <a.name> starts
help.psir03:<x.01> use '#Raw' Psion drives, rather than PsiRiscFS converted drives


# ------------------------------------------------------------------------------
# - 'PsiFS' configuration pane help messages    (Note : This pane is not really implemented yet)
# ------------------------------------------------------------------------------
help.psif:<x.10> PsiFS specific <a.name> options


# ------------------------------------------------------------------------------
# - 'Printers' configuration pane help messages (Note : This pane is not really implemented yet)
# ------------------------------------------------------------------------------
help.prnt:<x.06> printers specific <a.name> options

help.prnt02:<x.01> include any installed printer drivers in the main <a.name> menu
help.prnt03:<x.01> quit the Printer Manager application when <a.name> starts


# ------------------------------------------------------------------------------
# - 'Network' configuration pane help messages
# ------------------------------------------------------------------------------
help.netw:<x.06> network specific <a.name> drive options

help.netw02:<x.01> include shared discs in the main <a.name> menu
help.netw03:<x.01> remove shared discs icons from the iconbar
help.netw10:<x.01> include shared discs in the <a.name> toolbar
help.netw07:<x.01> only show remote shares in the <a.name> menu / Toolbar.

help.netw08:<x.01> include an icon for ArmTCP in the main <a.name> menu
help.netw09:<x.01> remove the ArmTCP icon from the iconbar
help.netw11:<x.01> include an ArmTCP button in the <a.name> toolbar


# ------------------------------------------------------------------------------
# - 'Shortcuts' configuration pane help messages
# ------------------------------------------------------------------------------
help.shct:<x.06> <a.name> shortcuts options

help.shct02:<x.01> include a '<shct.mainmenu>' entry in the main <a.name> menu
help.shct03:<x.02> select where the '<shct.mainmenu>' <x.21> <a.name> menu
help.shct04:<x.03> shows where the '<shct.mainmenu>' <x.21> <a.name> menu
help.shct07:<x.02> open the shortcuts builder
help.shct08:<x.01> suppress dialogs when files are dragged to the shortcuts builder window
help.shct17:<x.01> intercept MENU clicks on the Pinboard and show a <x.20> instead
help.shct18:<x.02> select the <x.20> <x.28>
help.shct19:<x.03> the name of the <x.20> <x.28>
help.shct11:<x.01> intercept your browsers 'Add a bookmark' message, and create a <a.name> shortcut instead
help.shct12:<x.02> select the Shortcuts menu in whicn to create the bookmark
help.shct13:<x.03> the Shortcuts menu that new bookmarks will be added to


# ------------------------------------------------------------------------------
# - 'Filters' configuration pane help messages
# ------------------------------------------------------------------------------
help.filt:<x.06> <a.name> desktop filtering options

help.filt02:<x.02> configure preset filter options
help.filt03:<x.02> configure user-defined filter options


help.flts:<x.06> <a.name> preset filtering options

help.flts01:<x.01> <x.29> window titles <x.30> path menu
help.flts02:<x.01> enable filer second-click-holding interception
help.flts03:<x.01> enable interception of files saved to the Pinboard
help.flts04:<x.01> enable the opening of the directory under the pointer in a filer window when Ctrl is pressed whilst dragging files
help.flts04:<x.01> enable window switching with Alt-Tab


# ------------------------------------------------------------------------------
# - 'Toolbar' configuration pane help messages
# ------------------------------------------------------------------------------
help.tool:<x.06> <a.name>'s toolbar configuration

help.tool02:<x.01> enable the main <a.name> toolbar
help.tool03:<x.02> select <x.33>
help.tool04:<x.03> <x.33>
help.tool06:<x.01> show 'tips' describing the function of Toolbar buttons when the pointer moves over the Toolbar.
help.tool11:<x.02> only show <x.34> <x.35> moves over the 'hot-spot'
# .|M <x.36>  (REMOVED BECAUSE DESKLIB IS WANK!)
help.tool12:<x.02> only show <x.34> <x.35> is at the far left of the screen
help.tool08:<x.02> hide <x.34> <x.35> moves away from the 'hot-spot'
# .|M <x.36>  (REMOVED BECAUSE DESKLIB IS WANK!)
help.tool09:<x.02> hide <x.34> after the user drags a file to it, or clicks on a button


# ------------------------------------------------------------------------------
# - 'SmartSave' configuration pane help messages
# ------------------------------------------------------------------------------
help.ssav:<x.06> <a.name>'s 'Smart' saver configuration

help.ssav03:<x.02> choose the file type to configure from a menu.
help.ssav04:<x.03> the description <x.37>  <x.02> overtype a new file type.
help.ssav06:<x.03> the icon <x.37>  Drag a file here to configure that type - <a.name> will also populate the path for you.
help.ssav07:<x.03> the numeric type <x.37>  <x.02> overtype a new file type.
help.ssav09:<x.02> delete <x.38>
help.ssav10:<x.02> set <x.38>
help.ssav11:<x.03> the directory that <a.name> will save files of the selected type into.  Overtype, or drag a file/directory here to change.

help.ssap:Click on a button to edit that file type's 'Smart' saver configuration.


# - 'Memoriser' configuration pane help messages
# - 'Trash can' configuration pane help messages


# ------------------------------------------------------------------------------
# -- Help includes. ------------------------------------------------------------
# ------------------------------------------------------------------------------
x.01:Tick this box to
x.02:Click here to
x.03:This field shows
x.04:This is the
x.05:configuration window
x.06:<x.07> <x.09>
x.07:This window
x.08:This pane
x.09:allows you to alter
x.10:<x.08> <x.09>
x.11:Enter the command to run when
x.12:<x.17> a file to run when
x.13:(toggle configured action with 'Alt' pressed)
x.14:choose the type of action to perform on
x.15:the action that will be performed on
x.16:iconbar icon
x.17:Drag here (or type the name of)
x.18:choose the <x.20> shown when you click on
x.19:the selected shortcut
x.20:shortcuts menu
x.21:entry will appear in the main
x.22:the current
x.23:<x.22> <x.20>
x.24:<x.02> open the
x.25:clicks upon the
x.26:files dragged to the
x.27:<x.02> edit the file run when
x.28:displayed when you click MENU on the Pinboard
x.29:enable the trapping of menu clicks on
x.30:to display a
x.31:change which action definitions are displayed
x.32:This icon shows if there are any actions assigned to clicks / drags
x.33:the <x.20> whose entries will be added to <x.34>
x.34:the main <a.name> toolbar
x.35:when the pointer
x.36:The 'hot-spot' is the area of the screen which <x.34> covers when on screen.
x.37:of the file type currently being configured.
x.38:the currently selected file type's settings.

# ------------------------------------------------------------------------------
# -- Application includes. -----------------------------------------------------
# ------------------------------------------------------------------------------
a.name:MiniDisc


# ------------------------------------------------------------------------------


# ------------------------------------------------------------------------------
# Messages file ends...      Anything after here is not my responsibility!
# ------------------------------------------------------------------------------